Aether
10:49
Aether
10:49
Welcome back
Your machine is ready
Your machine at a glance
Water
Level and temperature normal
OK
82°F
Last checked: now
Salt
Cartridge missing
Insert
cartridge
Safety
All systems normal
7 sensors OK
Last checked: now
Today's Clean Home
Kitchen surfaces Ready
Food rinse Recommended
Bathroom reset Due tomorrow
Skincare mist Fresh 2 days
Pet area Due in 3 days
Last Batch
— No batch yet
Mode
Free Cl
pH
Use by
Recommendations
Rinse produce before washing.
Make 250ml →
Fresh batch every 24–48 h.
Maintenance
Salt cartridge
64%
pH sensor
Calibrate
Electrodes
Good
Batches run
0
Recent Batches
No batches yet
Ready to generate
Last solution
Safe range confirmed
pH 5.8 · ORP 780mV · 45 ppm
Created 18 min ago
All operations normal.
Safety loop is clear and the machine is ready for generation.
Sensor bus OK
Interlocks OK
Last check now
Critical Safety Issue Detected
Safety
Critical Issue
Lid LockGood
pH sensorBad
ORP sensorGood
Water level sensorGood
Leak sensorGood
pH sensor
We detected that your pH sensor has degraded. Please contact support
480-590-4022
Salt
Insert
Cartridge
Water
OK
82°F
Last checked: now
Generation Blocked
A critical sensor failure has been detected. Generation is disabled until the issue is resolved.
Quick Start
Batch Amount
Small
250mL
Quick Start
Batch Amount
Small
250mL
Pre-Start Safety Check
Checking systems...
Starting verification
Generating skincare batch
Progress
0%
complete
Time Remaining
6:00
Initializing
Lid Locked
Cycle Steps
Safety
Lid LockLOCKED
Free ChlorineOK
Leak SensorOK
Water LevelOK
Chamber PressureOK
Live Quality
pH Level
5.4
target 5.0–6.0
Free Chlorine
22
ppm · target 20–30
ORP
710
mV · target 650–750
Temperature
82
°F
Filling
Water pump on
6:00
82°F · Chamber temp
Skincare · Small
Electrolysis active
Lid locked · Safe
5.4
pH
710
ORP (mV)
82°F
Temperature
Batch Cancelled
Skincare batch · Small (250mL)
What's next?
You can start a new batch or return to the home screen.
Batch Complete
Your Everyday solution is ready.
Quality Verified
122 ppm
Target: 100–150 ppm
Batch Quality
Mode
Everyday
Volume
500 ml
Free Chlorine
122 ppm
pH
5.8
ORP
780 mV
Temperature
82°F
Generated
Just now
Use by
24 hours
Status
Ready
Free Chlorine OK
pH OK
Cl₂ Gas Clear
Temperature OK
Lid Safe
Ready to Dispense
Batch verified and ready to use.
Everyday • General cleaning
Use by: Tomorrow 5:24 PM
Spray until wet. Wait 30–60 sec, then wipe or air dry.
Batch Details
Sensor report for this completed solution
Batch Summary
ModeEveryday
Volume500 ml
GeneratedJust now
Use within24 hours
Batch IDAET-0526-1724
Free Chlorine
122 ppm
Target range: 100–150 ppm
Within range
LowTargetHigh
pH
5.8
Recommended range: 5.0–6.5
Safe range
Safety Sensors
Free ChlorineOK
pHOK
Internal Cl₂ GasClear
External Cl₂ GasClear
TemperatureOK
LidSafe
Water LevelOK
Usage Instructions
Use on counters, sinks, and general hard surfaces. Spray until wet, wait 30–60 seconds, then wipe or air dry. Do not mix with other cleaners.
Quality Verified
This report is based on the final sensor pass after generation.
Dispense Solution
Place your bottle under the outlet.
Ready to Dispense
500 ml Everyday • 122 ppm
Bottle detected
Nozzle clear
Lid safe
Solution verified
0%
dispensed
0 ml / 500 ml
~12 sec left
Pump idle
Do not remove bottle during dispensing.
Everyday HOCl
122 ppm • pH 5.8 • Dispense Complete
500 ml transferred
Transfer control
The machine will dispense the verified batch into your bottle.
Aether
10:49
Aether User
Owner
Device
Solution Quality
Bottle & Cartridge
Production Modes
Maintenance
Light & Display
Notifications
Safety
App Pairing
AETHER v1.0.0  ·  Dev
Aether
10:49 82°F
CRITICAL ALERT
Emergency: Internal Cl₂ Detected